English
Italiano 
Colour CFC System
Colour CFC System
For cooling the electrocolouring baths, heat exchangers and circulation pumps suitable for acid solution are used.
They are also fitted with a cartridge filter for solution filtration.
Technocolour Power Supplier
Technocolour Power Supplier
The working is based exclusively on a special process computer in the remote control panel with suitable software for “Multicolour” interference colouring (blue, grey, green, etc.).
By means of such software it is possible to properly modify the barrier layer (thickness, size of the pore bottom etc.) during the post anodizing phase (modification step).
A conventional colouring treatment follows in order to get the requested colour.
Techno 7S – Static Power Supplier
Techno 7S – Static Power Supplier
New power supply for electrocolouring for improved uniformity, throwing power, colouring speed.
It is a new completely static unit (no movable parts, three phase supply). It is a computerized power supply which has been updated from the previous Tecno 4 and Tecno 5 models.
Tecno 7S can be used with conventional SALLOX (proprietary tin sulphate based bronze/black colour) at high speed (black in 7-8 minutes) or with SUPERSALLOX LT (proprietary sulphate bronze/black colour) for chemical saving at conventional speed.
Techno 4C
Techno 4C
While ordinary electrocolour power supplies are programmed for delivering (adjustable) alternating current, this particular instrument is capable to deliver successively and automatically unidirectional and sinusoidal alternating currents according to present programs.
These special programs make it possible to modify the electroplating mechanism in order to considerably increase colour throwing power and uniformity even in masked areas.
Techno 3
Techno 3
While the old conventional electrocolouring power supplies are equipped to deliver alternate voltage (which may be regulated) this equipment is capable of delivering in succession a direct current during the first phase and an alternate current during the second phase.
Compared to the traditional transformer it permits better colour throwing power with a consequent greater uniformity over the entire anodized surface, and the possibility of bigger loads.