Compact Powder Coating Plants

Compact Powder Coating Plants

Compact powder coating plants.

download.pdf

The ltaltecno Compact powder coating plant has been designed and engineered to coat, by means of polyester thermosetting powders, aluminium profiles and sheets. These items are loaded on suitable bars (complete with hangers). Standard models 1250 – 1500. Maximum load dimensions must be within 7000 x 300 x 1250 / 1500 mm; production up to 8-9 loads/hour for a standard plant. Plant design has been conceived to be able to carry out a particularly quick colour change. The advantage of the Compact plant compared to vertical and horizontal powder coating plant is the small room required and the limited initial investment when a low/medium production is required (300-500 kg/h).

Read More

Waste Water Treatment Plants

Waste Water Treatment Plants

Waste water treatment plants.

Download .pdf

Italtecno has developed waste water treatment systems which reduce the amount of contaminants at a level which complies to the most restrictive international regulations. In addition partial recycling of water (up to 50%) can be achieved with resin plants and total recycling can also be achieved by means of evaporators.

Read More

Electrochemical Brightening

Electrochemical Brightening

Electrochemical brightening.

Download .pdf

Electrobrigthening can give a high degree of “polishing” or more correctly “smoothing”, i.e. removal of surface roughness such as scratches or light machining marks. With slight changes in operating conditions it can be used for bright finish. Its main drawback is the relatively high capital cost of plant due mainly to cost of rectifiers. The standard of finish obtained is very high and a wide range of alloys and components can be satisfactorily processed by electrobrightening.

Read More

Chemical Brightening

Chemical Brightening

Chemical brightening.

Download .pdf

The ability of aluminium to compete in markets where a high standard of finish is essential has depended upon the development of chemical polishing processes, sometimes also referred to as “bright dipping”. However, the bright finish produced by this treatment has to be preserved by protecting it with an anodic coating. It must therefore be appreciated that the final finish obtained depends on the combination of material, brightening treatment and anodizing process employed, the combination often being referred to as “bright anodizing”.

Read More

Automatic Plating Lines

Automatic Plating Lines

Automatic plating lines.

Download .pdf

The advantages of fully automatic processing compared to hand operation are as follows: (click image on left to read more)

Read More

Vertical Powder Coating Plants

Vertical Powder Coating Plants

Vertical powder coating plants.

Download .pdf

The advantage of vertical powder coating plants compared to horizontal plants is the very high productivity (1000-2000 kg/h) at reduced running costs and less number of workers for racking/unracking.

Read More