Scrubber – Suction System With Hoods

Scrubber – Suction System With Hoods

Scrubber – Suction system with hoods.

Download .pdf

Fumes extraction is desirable on all etching and anodizing tanks as the hydrogen evolves during the processes and carries fine drops of caustic soda and sulphuric acid. The ducting is normally made of PVC or polypropylene, but stainless steel has also been used in some plants. Push-pull extraction systems are sometimes used. In most areas the fumes will require scrubbing in dilute acid/alkali or in water before being released into the atmosphere.

Read More

Dissolver System – Chemical Products Dissolution System

Dissolver System – Chemical Products Dissolution System

Dissolver System – Chemical Products Dissolution System

Download.pdf

Italtecno make available to their Customers a very innovative Monoblock Tank DISSOLVER system for batch mixing of powder chemicals into liquid. The system is provided complete of a water softener.
The fabrication is made around a built-in container in AISI304 stainless steel, with adjustable feet, and includes a control panel.

Read More

Dryplus – Drastic Reduction of Sludge Volumes From Anodizing Lines

Dryplus – Drastic Reduction of Sludge Volumes From Anodizing Lines

Dryplus – Drastic Reduction of Sludge Volumes From Anodizing Lines

download.pdf

The DRYPLUS process has been researched and patented by Italtecno with the aim to dramatically increase the “dry part” in the sludge produced as a waste in aluminium anodizing treatment lines. DRYPLUS allows to get a “dry part” equal to 40-50% of the total aluminium hydroxide sludge, in-stead of the usual 20-25% achieved in the tradi-tional processes. The environmental advantage of employing the DRYPLUS technology is evident, since the volume of sludge considered as an “industrial waste” is ac-tually halved, and the number of truck used to transport this volume of sludge is also halved. The cost effectiveness of DRYPLUS is also clear, since the costs for the disposal of the sludge is re-duced by half of what it could be with a traditional system.

Read More

Compact Powder Coating Plants

Compact Powder Coating Plants

Compact powder coating plants.

download.pdf

The ltaltecno Compact powder coating plant has been designed and engineered to coat, by means of polyester thermosetting powders, aluminium profiles and sheets. These items are loaded on suitable bars (complete with hangers). Standard models 1250 – 1500. Maximum load dimensions must be within 7000 x 300 x 1250 / 1500 mm; production up to 8-9 loads/hour for a standard plant. Plant design has been conceived to be able to carry out a particularly quick colour change. The advantage of the Compact plant compared to vertical and horizontal powder coating plant is the small room required and the limited initial investment when a low/medium production is required (300-500 kg/h).

Read More

Integrated Die-Clar and Crystalfix System

Integrated Die-Clar and Crystalfix System

Integrated Die-Clar and Crystalfix System

download.pdf

The advantages brought by the integration of DIE-CLAR (an innovative system for the cleaning of dies used in aluminium extrusion industry) and CRYSTALFIX (the most updated technology for the recovery of caustic soda used in the process of dies pickling) have
been successfully proven by Italtecno on the field.

With an INTEGRATED DIE-CLAR & CRYSTALFIX SYSTEM all the advantages connected to each individual technology are summed together and provide a total answer to the problems caused by the conventional dies pickling systems

see our new dedicated website: www.diecleaningplant.com

Read More