Dissolver System – Chemical Products Dissolution System

Posted by on Nov 21, 2012 in news, pdf_ancillary_equipment | 0 comments

Dissolver System – Chemical Products Dissolution System

Dissolver System – Chemical Products Dissolution System

Download.pdf

Italtecno make available to their Customers a very innovative Monoblock Tank DISSOLVER system for batch mixing of powder chemicals into liquid. The system is provided complete of a water softener.
The fabrication is made around a built-in container in AISI304 stainless steel, with adjustable feet, and includes a control panel.

read more

HT – High Temperature Filtration Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

HT – High Temperature Filtration Pump

HT – High Temperature Filtration Pump

download.pdf

Some processes in anodizing and plating require filtration of solution at high temperature, for example sealing in boiling water. The HT pump has been built in order to be resistant with liquids at 98-99 °C.
Available pump models are with cartridges or plates and paper discs.

read more

PFC – cartridge Filtering Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

PFC – cartridge Filtering Pump

PFC – cartridge Filtering Pump

download.pdf

PFC filter pumps are used for filtration of galvanic baths and corrosive liquids up to a temperature of 60°C. The filtration of these solutions is carried out by means of a magnetic drag-out pump and a filtering chamber with cartridges entirely built of acid resistant plastic material. Pushing the solution to be treated through the filtering cartridges it allows the working conditions of the liquid to remain constant.

read more

PFD – Paper Disc Filtering Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

PFD – Paper Disc Filtering Pump

PFD – Paper Disc Filtering Pump

download.pdf

The filter pumps are used for filtration of galvanic baths and corrosive liquids up to a temperature of 60°C. The filtration of these solutions is carried out by means of a magnetic drag-out pump and a filtering chamber with discs entirely built of acid resistant plastic material. Pushing the solution to be treated through a series of filtering paper or meraklon discs it allows the working conditions of the liquid to remain constant.

read more

SE 11 – Mixing and Filtering System for Seal Tanks

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

SE 11 – Mixing and Filtering System for Seal Tanks

SE 11 – Mixing and Filtering System for Seal Tanks

download.pdf

Some sealing products for low and medium temperature sealing are in powder form and it is advisable to dissolve them in liquid form before their addition to the sealing tanks in order to have a perfect homogenization of the chemicals before their addition.
SE 11 has been specifically developed for such purpose in order to make cheaper, safer and quicker the dissolution of powder and its addition to the tank.

read more

ITA 22 – Controller

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

ITA 22 – Controller

ITA 22 – Controller

download.pdf

This type of equipment is used in pretreatment lines before painting and powder coating.

read more

ITADOSE PDP – Dosing Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

ITADOSE PDP – Dosing Pump

ITADOSE PDP – Dosing Pump

download.pdf

Nowadays dosing pumps are essential equipment in order to feed the chemical tanks with right amount of liquid chemical; it can be added continuously, keeping the concentration of the solution always constant.
This range of dosing pumps have been specifically designed to guarantee accuracy and they are engineered for continuous dosing applications through a wide range of capacities. The design ensures a high degree of accuracy and reproducibility.

read more

ITADOSE EDP – Electronic Dosing Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

ITADOSE EDP – Electronic Dosing Pump

ITADOSE EDP – Electronic Dosing Pump

download.pdf

Currently, the use of metering pumps is critical to feed the tanks with the right amount of liquid chemicals; additions can be made continuously, keeping the concentration of the solution always constant.

read more

VT – Volumetric Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

VT – Volumetric Pump

VT – Volumetric Pump

download.pdf

The use of special acid and alkali resistant pumps is recommended to transfer liquid from tank to tank. The pumps must also be suitable to different viscosities.

read more

SP – Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

SP – Pump

SP – Pump

download.pdf

The centrifugal, mechanical seal, self-priming electropumps made of polypropylene are particularly designed for the use of corrosive acid and alkaline solutions or for liquid that cannot be in contact with metals. No mechanical part is in contact with the process fluid. The polypropylene allows the use of liquids with a max working temperature of 90°C.

read more

CD – Barrel Pump

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

CD – Barrel Pump

CD – Barrel Pump

download.pdf

Barrel pumps are ideal for the transfer of liquids because they are reliable, increase production and save time. They reduce breakdowns and increase safety during operation.

read more

EL 200 and EL 202

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

EL 200 and EL 202

EL 200 and EL 202

download.pdf

In order to obtain the required quality of the finished aluminium (anodized or pretreated before coating) it is necessary to have a good chemical control of the bath/spray solutions and a proper chemical addition. Great help is obtained with the use of mixing equipment and automatic dosing of chemicals.

read more

ITAMIX – Electric Mixer

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

ITAMIX – Electric Mixer

ITAMIX – Electric Mixer

download.pdf

In order to get a good mixing of chemicals it is important to choose the right type of mixer for the required application.
To enable selection and design of a mixer, the following information is required:

  • shape and dimensions of tank to which the mixer is to be fitted
  • volume of liquid to be stirred
  • viscosity and density characteristics of the liquid
  • method of agitation to be used (e.g. continuous, intermittent)
  • required agitation degree

read more

SCL – Blower

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

SCL – Blower

SCL – Blower

download.pdf

The lateral channel blower-exhausters (SCL) have been developed on the theory of the regenerative flow.
Due to their unique principle of operation and design, there is no contact between rotating and stationary parts.
The main advantages are the following:
• no wear parts
• no lubrication required
• minimum maintenance
• silent operation
• smooth air flow

read more

ROBOX – Integrated Compression Group

Posted by on Nov 8, 2012 in pdf_ancillary_equipment | 0 comments

ROBOX – Integrated Compression Group

ROBOX – Integrated Compression Group

download.pdf

ROBOX is an integrated compression package for conveying low pressure gases, equipped with the RBS positive displacement rotary lobes blower, driven by an electric motor through a special V-belt transmission, and complete with all necessary accessories.
ROBOX packages perform up to 150 m3/min capacity and fit up to 250 kW motors. For higher capacities and up to 250 kW motor installed power, GRB packages with standard V belt drive transmission are available, whereas for installed power over 250 kW, CRB packages, with direct drive or gearbox, are used.

read more